CAD/CAM products

Schouten CAD/CAM Products is een producten groep van Schouten Dental ingericht voor de verschillende CAD/CAM systemen. Wij leveren bijvoorbeeld anti reflecterende spray, opvul wax, kleurcode bepaling, zirkon-, CoCr-, Titan-, Polya- en Was BioStar producten  in diverse maten en diktes voor de vele kopieerfrezen en CAD/CAM systemen zoals:
 

Staat uw systeem niet in de lijst, neem dan contact met ons op voor het juiste product per mail info@schoutendental.nl of per telefoon 0186 60 3600.

CoCr BioStar BioStar is a precious metal free, chromium cobalt-based alloy for the dental application used in dental milling machines (CAD-CAM). It does not contain any nickel, beryllium or gallium. One of the remarkable features is the high corrosion resistance and biocompatibility. CoCr BioStar is suitable for soldering. Its low hardness allows CoCr BioStar to be easily milled.

TITAN BioStar TITAN BioStar is a precious metal free, titanium-based alloy for the dental application used in dental milling machines (CAD-CAM). It does not contain any nickel, beryllium or gallium. TITAN BioStar is biocompatible and usable for the crown and bridge technique, telescopic and double crowns.

Wax BioStar A milling wax disc especially adjusted to the dental CAD/CAM technique. Thereby crowns and bridges can be virtually formed, milled and finally casted the conventional way. The wax is excellently machinable and burns without residue. This results in smooth casted surfaces. These optimized features of the wax give way to even very delicate forms excluding shrinkage or distortion of the milled object. The wax – staable in volume – permits absolutely exact margin finishings and fits. Up to 30 units can be milled out of one disc.

Polya BioStar PP Polya BioStar PP is a thermoplastic acrylic milling blank designed for making long-lasting temporary crown and bridge work. Polya BioStar PP can be used in all CAD-CAM machines. -   Very high break resistance -   Plaque resistent -   High surface density -   No toxic agents, benzyol peroxide free -   Free of residual monomer (below 0.3%) -   High translucence property -   Adding of colour shades are no problem -   Perfect for telescopic crown -   Available in 4 different colours

Hinriplast® BioStar A special gypsum blank for the use in dental milling machines with an extraordinary edge stability, produced from resin reinforced super hard stone for the milling process of digital impressions. Colour: ivory.

Zirkon Biostar Zirkon BioStar, Zirkon BioStar Z or Zirkon BioStar Colour are dental blanks (semi-finished products) made of yttrium stabilized, pre-sintered zirconium dioxide for milled production of crowns and bridge frameworks on commercial CAD/CAM systems or hand-operated copy-milling machines with outstanding biocompatibility and high resistance against tension and pressure. Because of the special single cip™ production process (after the uniaxial pressing, every blank will be packed separately and pressed under an isostatic vacuum) we guarantee thru different batches a constant high quality. The pre-sintered blanks are eminently suitable for all open machining and have excellent edge stability. On account of the special production process, extremely constant firing shrinkage is achieved, even over different batches, meaning that in most cases it is not necessary to adjust the enlargement factor on the CAD/CAM unit. Only diamond-charged grinding tools or hard metal tools are to be used for machining. The material types Zirkon BioStar and Zirkon BioStar Z differ regarding the strength value achievable after the final sintering and contain a different amount of aluminium oxyde. They differ in the manner of whiteness  and translucency and both show a different resistance against hydrothermal aging. Zirkon BioStar Colour is already persistent coloured in the pre-sintered stage.

Zirkon BioStar Zirkon BioStar is a white zirconium dioxide with a content of aluminium oxide for a better hydro thermal aging. Zirkon BioStar is usable for all common ceramic colour liquids. Zirkon BioStar Z Zirkon BioStar Z is a translucent zirconium dioxide with a lower content of aluminium oxide. Zirkon BioStar Colour Already persistent coloured zirconium dioxide in the pre-sintered stage, produced according the same single cip™ production as Zirkon BioStar. Available in 5 different colours. -    The persistent coloured blanks guarentee a constant and homogenous             colour quality -    Saves a lot of time because there is no colouring and drying process anymore. Colour orientation compared to the VITA-Colour code: 500    => A1/A1            800  => A3/B3 1000  => C2/C3          1333  => A3,5/B4 2000  => A4

Zirkon Biostar K Pre-sintered blocks and cylinders made of zirconium dioxide especially for the use with the KaVo Everest® system.* *KaVo Everest is a registered trademark of the manufacturer.

Zirkon BioStar S Pre-sintered blocks made of zirconium dioxide especially for the use with the Sirona inLab® und inLab® MCXL system.* -     Available in 3 different colours (white opaque, colour 500, colour 1000) -     The necessary system code (Z-code) will be delivered for every batch *Sirona inLab® and inLab® MCXL system is a registered trademark of the manufacturer.

Zirkon BioStar ZZ Pre-sintered blocks made of zirconium dioxide especially for the use with the Zirkonzahn® system, available in different sizes. -    Perfect edge stability in manual and automatic milling machines -    Usable for pantographic systems and other CAD/CAM systems -    Constant sintering shrinking of 20% -    The milling and sintering process is identical to the Zirkonzahn* system *Zirkonzahn® is a registered trademark of the manufacturer.

CAM-Stone N CAM-Stone N is a product for scanning, for more information about the CAM-Stone N you can check it on the webshop, it is located below the tab "Klasse IV gips". Click here to go there

HinriScan-Wax Scannable modelling wax. Used in blocking out cavities and closing saw cuts prior to scanning. For all CAD-CAM systems (white light and laser scan). Compatible with CAM-Stone N, as no additional spray/powder is needed when using HinriScan Wax. For optimum scan and fit.

HinriScan varnish Scannable non-reflecting varnish for all dental gypsum. Anti-reflex liquid for all CAD-CAM systems. Smoothes surfaces to be scanned. For extra-oral laboratory use only. Laser-opaque, washes off. Use HinriScan thinner for thinning suitable for all dental gypsum.

HinriScan-Spray 2 scannable sprays. Extra-fine atomiser for ultra fine spray film, ensures finest edge presentation. Homogeneous spray condition with very smooth surfaces. Easy to clean with water steam. Extra -  suitable for all CAD-CAM systems -  for the direct intraoral application to the preparation -  also usable for all dental gypsum (extraoral)   Standard - suitable for all CAD-CAM systems - for the direct application to gypsum model